在建筑工地上，人們經常需要使用到推土機這種機械設備來進行推土作業，那么，當我們在使用該設備的時候，應該怎樣正確地去使用呢？接下來，冷再生機租賃廠家小編將會具體給大家介紹其中的方法。

On construction sites, people often need to use mechanical equipment such as bulldozers to carry out soil pushing operations. So, how should we use this equipment correctly? Next, the editor of the cold regeneration machine rental manufacturer will introduce the specific methods to everyone.

1、應當嚴格依照作業的項目、范圍、地形地貌等，精心規劃合理的作業方法和行走路線。

1. We should carefully plan reasonable operation methods and walking routes in strict accordance with the project, scope, terrain, and topography of the operation.

2、通常情況下，當我們在操作該機械時，要少空行、少拉操縱桿、直駛正推、作業。

2. Normally, when operating the machine, we should avoid idling, pulling the control lever less, driving straight forward, and ensuring safe operation.

3、當我們需要用推土機來推土時，按照一般要求，機身先要停穩擺平，輕放鏟刀，進土深度跟吃土量要大體一致。

3. When we need to use a bulldozer to push soil, according to the general requirements, the machine body should first be stopped and leveled, and the blade should be gently placed. The depth of soil entry should be roughly the same as the amount of soil taken.

4、推進速度不能太過快速，建議大家盡量稍稍放慢速度，避免鏟刀受過大的沖擊或滑溜。

4. The propulsion speed should not be too fast. It is recommended that everyone try to slow down slightly to avoid the blade from being heavily impacted or slipping.

5、在推土的過程中，操作人員的注意力務必要集中，工作中應當做到隨機應變。

5. During the process of bulldozing, the operator's attention must be focused, and they should adapt to the situation in their work.

6、一旦出現推土不順暢的情況時，各位千萬不要盲目的大油門猛轟硬推，也切記不可猛抬離合器硬撞。

6. Once there is a situation where the soil pushing is not smooth, everyone should not blindly use high throttle to forcefully push, and also remember not to forcefully lift the clutch and collide.

7、推土鏟刃口要時常保持鋒利的狀態，其一面磨鈍后可換面使用，兩面皆嚴重磨損，可直接換一個新的。

7. The blade of a bulldozer should always be kept sharp. After one side is blunt, it can be replaced. If both sides are severely worn, it can be directly replaced with a new one.

倘若推土機常年在惡劣環境中艱難地作業，那么將會很大程度地造成拖拉機底盤和推土鏟各零部件的早期磨損、變形、緊固件松動等。因此，平時我們需要對其進行正常的保養。更多關于相關設備的事項就來我們網站http://m.jsscr.com咨詢吧！

If the bulldozer works hard in harsh environments all year round, it will greatly cause early wear, deformation, and loosening of fasteners on the tractor chassis and various components of the bulldozer. Therefore, we need to maintain it normally. For more information about related equipment, please visit our website http://m.jsscr.com Consult!