The requirements of cold regenerator in road construction are very high. When it wants to reach its structural life, it will produce deep cracks, pits and bags, resulting in serious decline of road performance. As an economical road maintenance and reconstruction method, the main advantage of in-situ cold regeneration is that the existing pavement is strengthened by 100% using old materials, and the foundation needs to be strengthened. Secondly, it has the advantages of short construction period and small interference to public transportation. Moreover, compared with other maintenance methods, the cost of in-situ cold regeneration will be greatly reduced, So as to save more manpower and material resources!

冷再生機出租的時候，都是具有針對性的，還一直采用修新路用的傳統(tǒng)設備，以傳統(tǒng)的重建方式進行。盡管這種方法可以保證質量，但顯得過于笨重、工期過長，特別是不能不斷交施工。更由于不能充分利用現有路面材料，不僅成本很高，也不。由于及經濟的原因，盡可能多地利用現有路面鋪層材料進行道路維修。

When the cold regenerator is rented, it is targeted, and the traditional equipment for road repair has been used in the traditional way of reconstruction. Although this method can ensure the quality, it is too cumbersome and the construction period is too long, especially it can not be handed over continuously. Moreover, due to the inability to make full use of the existing pavement materials, it is not only costly, but also environmentally friendly. Due to environmental protection and economic reasons, the existing pavement paving materials shall be used as much as possible for road maintenance.

冷再生機租賃的時候，是根據現有路面銑刨到確定的深度，以便獲得現有鋪層材料。然后，通過加入粘結劑對這些材料進行再生處理，從而獲得一個得到加強的新鋪層。整個再生過程是一個一次性的過程?，F在，已經有成熟的集現代工程機械新技術于一身的再生機械，現在，就地冷再生作為一種舊路維修改造方法，已經在世界上許多得到廣泛承認。這一工藝適用于維修或升級改造從無鋪面的礫石路，到承受重負荷的干線公路的大范圍的道路。

When the cold regenerator is leased, it is first milled to the determined depth according to the existing pavement in order to obtain the existing paving material. Then, these materials are regenerated by adding binder, so as to obtain a new reinforced layer. The whole regeneration process is a one-off process. Now, there are mature regeneration machines integrating new technologies of modern construction machinery. Now, as a method of old road maintenance and reconstruction, in-situ cold regeneration has been widely recognized in many countries in the world. This process is suitable for repairing or upgrading a wide range of roads from unpaved gravel roads to heavy-duty trunk roads.