泡沫瀝青冷再生技術是對回收瀝青路面材料和水泥穩定基層材料進行再生利用。不僅能夠充分發揮舊瀝青混合料的“剩余價值”，促進舊路面材料的循環利用，保護生態環境，減少資源浪費，同時，瀝青路面冷再生施工，也將半剛性路面結構轉為半柔性結構，延長了道路瀝青的使用壽命。

The cold recycling technology of foam asphalt is to recycle the recycled asphalt pavement materials and cement stabilized base materials. Not only can it fully utilize the "residual value" of old asphalt mixture, promote the recycling of old pavement materials, protect the ecological environment, and reduce resource waste, but also the cold recycling construction of asphalt pavement can transform the semi-rigid pavement structure into a semi flexible structure, extending the service life of road asphalt.

目前主要采用膨脹率和半衰期2個指標對瀝青發泡特性進行評價。膨脹率是指瀝青發泡膨脹時達到的體積與泡沫完全消失時的體積之比，反映泡沫瀝青的粘度大小。半衰期是指泡沫瀝青從體積降到體積的一半需要的時間，瀝青路面冷再生機，以s計，反映泡沫瀝青的穩定性。評價瀝青發泡效果時，膨脹率和半衰期是兩個密不可分的指標，的發泡效果應使兩個值均比較大，而不能單獨采用一個指標來控制。建議發泡瀝青的膨脹率≥10倍，半衰期≥8 s

At present, the foaming characteristics of asphalt are mainly evaluated using two indicators: expansion rate and half-life. The expansion rate refers to the ratio of the volume reached when the asphalt foams and expands to the volume when the foam completely disappears, reflecting the viscosity of foam asphalt. The half-life refers to the time required for foam asphalt to reduce from the volume to half of the volume. The asphalt pavement cold recycling machine, in seconds, reflects the stability of foam asphalt. When evaluating the foaming effect of asphalt, the expansion rate and half-life are two inseparable indicators. The foaming effect should be such that both values are relatively large, and cannot be controlled by a single indicator. It is recommended that the expansion rate of foamed asphalt be ≥ 10 times and the half-life be ≥ 8 seconds

我公司一臺600馬力機械傳動冷再生機RZ2300交付租賃用戶?？蛻糁耙呀?jīng)使用多臺路面冷再生機，但對于國內強度較高的路基冷再生難以達到理想施工效果，迫切需要合適的高端冷再生機。用戶早在去年即開始考察，對比國內各種型號的冷再生機，認為我公司生產的機械傳動冷再生機RZ2300性能可靠，綜合工作性能高，與我公司簽定了意向定單。春節后，經過我公司精心裝配與調試，機器已交付用戶到達施工工地。

Our company has delivered a 600 horsepower mechanical transmission cold regeneration machine RZ2300 to the leasing user. The customer has previously used multiple road surface cold recycling machines, but it is difficult to achieve ideal construction results for domestic high-intensity roadbed cold recycling, and there is an urgent need for suitable high-end cold recycling machines. The user started to investigate as early as last year, comparing various models of cold regeneration machines in China, and believed that our company's mechanical transmission cold regeneration machine RZ2300 has reliable performance and high comprehensive working performance. They signed an intention order with our company. After the Spring Festival, our company carefully assembled and debugged the machine, and it has been delivered to the user and arrived at the construction site.