為什么需要利用冷再生施工？究竟冷再生機租賃公司租賃的冷再生設備能具有多大的作用？它的施工速率如何？成本增加不高？接下來讓小編給各位解釋關于冷再生施工的幾個優點。

Why is it necessary to use cold recycling for construction? How important is the cold recycling equipment leased by the cold recycling machine leasing company? What is the construction rate? Cost increase is not high? Next, let me explain to you some advantages of cold recycling construction.

1.低成本

1. Low cost

道路就地冷再生機因為所有利用了舊的路面起模原材料，進而降低了道路檢修或更新改造時舊起模原材料的基坑開挖、運送、廢置和新型材料的購買，進而造成成本費大幅降低。

The road in place cold recycling machine uses all the raw materials for the old pavement formwork lifting, thus reducing the excavation, transportation, waste and purchase of new materials of the old formwork lifting raw materials during the road maintenance or renovation, thus resulting in a significant reduction in costs.

選用道路就地冷再生比傳統式方法對比，伴隨著再生層薄厚的不一樣，能夠控制成本，冷再生路面薄厚越厚，控制成本越多。

Compared with the traditional method, the in situ cold recycling of roads can control the cost due to the difference in the thickness of the recycling layer. The thicker the cold recycling pavement is, the more the cost will be controlled.

在路面農村基層因其原料的再利用可節約很多項目投資，在低級別路面中，因用冷再生加工工藝可提升路面農村基層級別而減少整體面層的資金投入，這類客觀性具體優勢的存有是促使就地冷再生技術性遭受認可而且獲得迅速發展趨勢的原始動力。

The recycling of raw materials can save a lot of project investment in rural pavement base course. In low-grade pavement, the use of cold recycling processing technology can improve the level of rural pavement base course and reduce the investment in the overall surface course. The existence of such objective specific advantages is the original power to promote the recognition of on-site cold recycling technology and obtain rapid development trend.

2.效率高

2. High efficiency

道路就地冷再生機械設備施工一次性能夠進行瀝青道路、粉碎、加上、攪拌及鋪筑，進而簡單化了施工程序流程，減少施工施工期。應用就地冷再生機械設備，每日施工可進行平米的勞動量。

The construction of on-site cold recycling mechanical equipment can conduct asphalt road, crushing, adding, mixing and paving at one time, thereby simplifying the construction process and reducing the construction period. With the use of on-site cold recycling mechanical equipment, the daily construction can carry out square meters of labor.

3.受氣溫標準危害小

3. Less harmed by temperature standards

舊地冷再生可以在氣溫自然環境不確定性的標準下施工，除開在降水量很大時，一般的變幻無常的氣溫，毛毛雨氣溫，冷再生機均可施工，即便在暴雨之后，也可立刻修復施工。

Cold regeneration of old land can be carried out under the standard of uncertainty of temperature and natural environment. Except when the precipitation is large, the general changeable temperature, drizzle temperature and cold regeneration machine can be constructed. Even after the rainstorm, the construction can be repaired immediately.

4.對城市公共交通危害明顯降低

4. Significantly reduce the harm to urban public transport

冷再生租用施工的特性是冷再生工藝流程簡潔明了，施工設備少，對交通出行影響體現不比較敏感全部冷再生機械設備組成能夠處在同一條行車道內，不危害另一條行車道機動車行駛，可開展敞開式施工，非常適用車流量很大或路寬窄小狀況下的道路的施工。

The characteristics of cold recycling rental construction are that the cold recycling process is simple and clear, the construction equipment is few, and the impact on traffic is not sensitive. All cold recycling mechanical equipment components can be located in the same lane, and do not endanger the driving of motor vehicles in another lane. Open construction can be carried out, which is very suitable for the construction of roads with large traffic flow or narrow road width.

當?shù)缆钒敕┕r，另半幅仍舊啟用，進而大大的改進施工情況下的交通條件。因而，做為一種效率高、、環境保護道路檢修方式和新技術新工藝，路面冷再生機早已變成國際性上道路更新改造的關鍵方式之一。

When half of the road is constructed, the other half is still in use, thus greatly improving the traffic conditions under construction. Therefore, as a high efficiency, environmental protection and energy conservation, environmental protection road maintenance mode and new technology and new process, road cold recycling machine has already become one of the key ways of road renewal and reconstruction internationally.

就地冷再生施工能夠依據不一樣道路舊起模原材料的具體情況開展設計方案，挑選不一樣的防腐劑，能夠確保再生原材料的品格和施工品質，產生施工成形厚而勻稱的粘接層，進而確保了檢修后道路的應用限期。您有什么需求可以來我們網站http://m.jsscr.com進行咨詢！

The on-site cold recycling construction can carry out the design scheme according to the specific conditions of the old mold lifting raw materials of different roads, select different preservatives, ensure the quality and construction quality of the recycled raw materials, generate thick and symmetrical bonding layer for construction, and thus ensure the application deadline of the roads after maintenance. If you have any needs, you can come to our website http://m.jsscr.com Consult!